Valve springs big end bearings upgraded

List valve springs big end bearings upgraded

  • The car has had the following modifications: bw i beam connecting rods - block brace - updated valves and valve springs - big end bearings - upgraded head studs - higher flow cc fuel injectors - kelford...

    24995 €

  • All upgraded to 924carrera gt specification...crank re grind & balance, new main shells, big end bearings and seals, piston bores cleaned, new piston ring set, head gasket, block core plugs, new oil pump...

    14500 €

  • 8mm metal head gasket greddy rocker arm stoppers greddy large capacity baffled sump tomei poncams ferrea double valve springs ferrea titanium valve spring retainers ferrea valve spring seats motec m400...

  • The engine block, crank and cylinder head were machined/renewed – the block was re-bored to +40, crank was polished and balanced and the bottom end was re-assembled using standard sized big end bearings...

    23995 €

  • Heads were checked, chemically cleaned and de-coked and valves re-polished and re-assembled with new valve seals etc, all parts of head deemed serviceable and within specifications...

    11999 €

  • The list was extensive and included wosner pistons, steel conrods, big end bearings, main bearings, headset, sumpset, headbolts, waterpump and cambelt kit...she drives really well, no smoking present and...

    4000 €

  • Full and very detailed service history available, however here is a summary: chain guides chain tensioners vanos rebuilt big end bearings iridium spark plugs 8x coil packs engine mounts complete propshaft...

    14995 €

  • *standard crank with acl race bearings and big end bearings *standard con rods with standard mahle pistons low comp to 7-2-1...*polybushed throughout *new wheel bearings *braided goodridge brake hoses...

    49995 €

  • Full rebore new racing cam pistons fuel pump unleaded conversion big end bearings, cam belt v springs inlet manifold core plugs - 5 speed manual gearbox _ new clutch assembly – limited slip differential...

    24950 €

  • Over £ worth of reciepts* ims (intermediate shaft) bearing upgraded, cylinders lined* new big end bearings* valves reseated, heads skimmed and pressure test, new valve seals, * ” 2 doors...

    19750 €

  • Specification of the car - engine - hks step 2 cams (254) hks adjustable vernier brian crower titanium oversized valves brian crower titanium valve springs/retainers rocker stoppers arp head bolts arp...

    17000 €

Did not find what you're looking for? Try again

Related Searches valve springs big end bearings upgraded