Big end bearings
List big end bearings
-
Originally bought as a standard totally immaculate low miles car from a porsche specialist that took it in px currently on 91k brand new miles old king racing big end bearings brand new miles old arp...
21999 €
-
The engine block, crank and cylinder head were machined/renewed – the block was re-bored to +40, crank was polished and balanced and the bottom end was re-assembled using standard sized big end bearings...
23995 €
-
Ln engineering ims upgrade installed earlier removed and inspected no damage found all genuine porsche parts where used during the rebuild these included but not limited to:- full piston ring set main...
11999 €
-
The rebuild included new piston rings, big end bearings, little end bearings, new timing chains, new timing chain tensioners, upgraded rennline billet aluminium upper and lower cam covers (factory covers...
55995 €
-
In october the bottom end of the engine was re-built; main bearings and big end bearings and so the car runs beautifully...since then all of the woodwork has been replaced with the associated remedial...
17995 €
-
*standard crank with acl race bearings and big end bearings *standard con rods with standard mahle pistons low comp to 7-2-1...*polybushed throughout *new wheel bearings *braided goodridge brake hoses...
49995 €
-
We do engine building and fitting here, below is what this engine / vehicle has had repleaced by us:- new main bearings, big end bearings, piston rings,head bolts, uprated chain kit incuding all guide...
4495 €
-
“ engine was taken apart to rebuild and whilst moving house lost sump and one conrod cap otherwise full engine is here has miles on it will obviously need rebuilt but these engines are like hens teeth...
500 €
-
9 alloy block mi16 engine with gti6 alloy sump (full details of engine rebuild at the end of the advert)...3 under mains, std big ends new main and big end bearings new crank seals new 16v liners, with...
8250 €
-
Full and very detailed service history available, however here is a summary: chain guides chain tensioners vanos rebuilt big end bearings iridium spark plugs 8x coil packs engine mounts complete propshaft...
14995 €
-
4-litre engine was treated to a major overhaul during which new valves, cast alloy pistons and crankshaft and big end bearings were installed, the crankshaft journals cleaned up, and the unit rebored...
155000 €