Kent cams
List kent cams
-
Loads of bills & history included from when she was imported to uk by andy barnes at sumo power in kent...for more pictures / information call kevin bolton engine spec: hks gt-ss twin turbos metal head...
12995 €
-
Meanwhile, other larger variants of the ford kent block, up from 997cc to cc, became available and chapman was eager to exploit the potential for extra performance...meanwhile providing the 'go to match...
-
• cams: piper cams with a development profile that uses hydraulic tappets...the cams are timed using a set of piper vernier type cam pullies...the cams operate on valve gear using uprated duplex springs...
15995 €
-
The hks gt2 turbo perfectly matched with the cams provides for a quick spooling engine with great top end power...engine hks gt turbo hks turbo elbow hks intercooler hks intercooler piping hks gaskets...
18995 €
-
Original ‘standard’ parts included rear wing injectors steering rack/pipes front calipers/carriers cams plenum and airbox/afm master cylinder flywheel fog lights cooling fan anti roll bars light grey carpet...
69500 €
-
0mm) pec forged rods hks step cams rebore hydraulic lifters timing chain kit inc gears vvt cam gear sprocket crank regrind head reface turbo rebuild including manifold and back housing refacing 3 belt...
11998 €
-
Piper 285 cams arp rod bolts...if you really felt inclined an extra 10 to 15 bhp could easily be obtained from the engine with more racy cams and further cylinder head work but i personally wouldn’t bother...
9000 €
-
Production proper got underway in the spring of after the first 25 twin cams had been assembled at boreham...a pair of the boreham-built twin cams dominated the televised croft rallycross meeting in february...
-
Cambelt / water pump and cams replaced @42k miles...20mm wheel spacers with front & rear and stud & nut kit installed...wheels and tyres: 4no black speedline rims with pirelli p zero road tyres, 6no speedline...
8900 €
-
Recently had a stage 3 competition clutch and flywheel bearing fitted by cams performance...has godspeed front 'g' hook discs and uprated brembo pads...not too loud but just enough when on a spirited drive...
8900 €
-
7 to 1, chrome moly rings, double roller timing set, comp cams hydraulic roller camshaft, clevite bearings, edelbrock performer rpm aluminum cylinder heads with stainless steel valves, hd valve springs...
39995 €
-
(turns on pump fuel) comp cams solid race cams and lifters, roller rockers, edelbrock victor jr inlet, 750cfm duel feed holly, vortec filter, mallory/unilike/promaster ignition with mallory msd control...
9995 €