Epoxy
List epoxy
-
The chassis was sandblasted and treated with epoxy primer and black semi-gloss paint...on the bed floor an extraordinary work was made with vintage wood, epoxy resin and a rising sun depicted on it...
-
Doors, bonnets and boot fit to body, epoxy sealed and painted, color sanded and buffed...the xke's chassis and many other parts powder coated, under carriage fully rebuilt, new wire harness, gas tank restored...
-
The chassis was also chemically cleaned and an epoxy primer was applied...beautiful mg tf from in absolute excellent condition! body-off restored, all the woodwork was replaced, the sheet metal parts...
-
The red epoxy resin used to bond the aluminium during build is still bright all over the car, and the v...necessary trips to the dealer that fell on a wet day!)...it even has the original rubber tyre inflator...
28995 €
-
Underside epoxy primed and painted in body colour...original radio sourced refurbed with aux,new speakers and amplifier...suspension refurbed and uprated...concours condition after having a full nut and...
25000 €
-
8t engine & gearbox full years mot and tax book up to date spec list below underside – bare metal strip down, welded repairs (photos available) epoxy mastic 121 & upol gravtix (stonechip) & body coloured...
7200 €
-
The chassis is epoxy resin coated and much better than new and all wheel arches, floorpans are finished in blue as per original build the restoration included engine, gearbox, axle and mechanical rebuild...
32950 €
-
Car is on original scuttle panel and is in perfect condition underneath has been stripped to bare metal to ensure no corrosion and re-finished in epoxy zinc primer, seam sealed, 3m underseal and then...
69500 €
-
I have also treated some of the underside surface corrosion, surface wire wheeled back, treated with bilt hamber hydrate 80 and finished with bilt hamber epoxy mastic...the rear seats have been removed...
6500 €
-
The w8�۪s monocoque chassis was bonded with epoxy and riveted to an aluminum honeycomb structure floor pan...after putting these finishing touches on the mind-blowing show car, the final cost to develop...
-
Orange, full service history, anodised, lightweight aluminium, extruded, epoxy bonded and rivetted high-stiffness chassis unequal length, high lateral stiffness, forged aluminium, double wishbone suspension...
121325 €
-
All aluminum paneling powder coated in satin black epoxy powder coat...quaife five speed type 9 straight cut close ratio gearbox raceline light flywheel...tunnel mounted ignition and start switches...
9000 €