Crank

List crank

  • This is the later five bearing crank engine...this is the later 5 bearing crank engine which is far better than earlier series 3's...matching cloth bench seats have been fitted to the rear with 4 lap belts...

    8250 €

  • The engine is painted the correct colours red block and black head which is age correct for a 5 bearing crank engine, the 5 bearing crank engine is much better than the earlier engine there is more power...

    24995 €

  • 2 mm head gasket genuine gasket kit cam and crank seals rear main seal weisco 85mm hd stroker pistons 156mm carrillo long rods acl race bearings acl thrust bearings arp head studs arp main studs new mitsubishi...

    15000 €

  • *standard crank with acl race bearings and big end bearings *standard con rods with standard mahle pistons low comp to 7-2-1...*brand new, last of fords old stock 200 block with small core plugs...

    49995 €

  • • new front crank seal fitted • engine oil & filter changed condition mechanically this car is lovely...• timing gears replaced — aluminium & crank cast iron • sump removed and cleaned out • new sump gasket...

    18950 €

  • 5mm forged pistons / rings / pins all cylinders bore / plateau / hone new front crank seal new rear crank seal new waterpump gasket block half seal kit 11mm high tensile head studs new avcs inlet cam...

    12995 €

  • All in all, a great car that has only ever broken down on me once when the crank sensor went...recent work includes new coilpacks on the front bank, crank sensor, oil/intermediary service, new front brakes...

    995 €

  • 3 litre s14 still in the car has had a full and no-expense spared re-build miles ago including: new timing chain, tensioner, guide rails and all associated parts new oem oil pump & horizontal sump baffle...

    69500 €

  • Enhancements include: ·       lenzo 15" deep dish alloys without any scuffs or damage whatsoever and four good tyres ·       mono wiper conversion ·       open front grill louvered bonnet, ·       de-locked...

    9450 €

  • 8 litres! a steel crank with carrillo rods and cosworth pistons was installed as well as a high capacity oil pump so as to keep up with the demands of this monster engine...this is not a purist or collectors...

    585000 €

  • 3 stroker fully rebuilt and forged and stroked it has covered aporox miles since build     * engine block has been machined to accept the 4g64 crank & machined for oversize pistons and painted black  ...

    22995 €

Did not find what you're looking for? Try again

Related Searches crank